Inspired by Kinkongs’ Fly Egg 130 model, this quadcopter is designed to fit 2204 motors and is aerodynamically efficient and lightweight at the same time. Arms are reinforced by 4.0mm carbon fiber tubes which make them extremely crash resistant. Still testing how it handles crashes.
STL files
https://www.thingiverse.com/thing:2588223
Part List
Part | Link | Price |
---|---|---|
AIO Flight Controller | https://amzn.to/2MSNLVf | $59.80 |
Motors | https://amzn.to/2sHzNyG (2205) | $31.96 |
Props | https://amzn.to/37tE5Za | $7.25 |
Receiver | https://amzn.to/35n0N3I | $24.99 |
VTX | https://amzn.to/2QGuwPP | $19.99 |
Camera | https://amzn.to/2MLlqAf | $34.99 |
Carbon fiber tube | 4mm x 210mm * 2 | $5.00 |
Screws | M3 x 10mm * 4
M2 x 6mm * 4 |
$2.00 |
1. Print all PLA parts for the build
2. Slide in carbon rods, use CA glue to hold them in place. Weights 34g with carbon fiber tube.
3. Mount flight controller and ESC. Double sided foam is recommended, since two of the FC mounting holes are blocked almost completely by carbon tube
4. Install 2204 motors and solder them onto ESC (motor protectors can be used for extra protection)
5. Assemble left and right frame with M2 screws, then install them onto the main frame with M3 10mm screws. This is also a good chance to mount the camera, Runcam micro swift 2 is used in this build
6. Solder everything onto FC board
7. Test flight!!
UPDATE
VTX03 finally arrived, fits perfectly behind the camera.
Track Banggood prices of parts for this build : https://bgtracker.online
What size 3D printer bed is required for this build?
LikeLike
20x20cm would be more than enough.
LikeLike
Bummer. My Monoprice Select Mini is only 12x12cm (120x120mm).
LikeLike
Hello, very good job, can you modify the frame to use 30x30mm, or use 20x20mm and 30x30mm, also make the drills at 45º to avoid problems with the carbon rods or use a controller + not X.
thank you.
LikeLike
Thanks. Please check out the new flight controller mount on Thingiverse, it can be mounted to the frame with two M3 screws or soft mounted with double sided foam. You can also try the 30.5mm FC mount, haven’t tested it yet, not sure if it will fit.
LikeLike
Hi, i see, new desing wirh sopport 30.5mm sorry, and other desing 4inches, no carbon-fiber? no need?
LikeLike